. .

Combination models

Combination models simulate basic functionalities of defined parts of plants in the field of industry. The focus is on the demonstrative presentation of typical job definitions in the field of control engineering.

The main differences compared to the Standard and Compact models are:

  • separately or combined applicable
  • for group projects convenient (linkage possible)
  • complexity selectable
  • nearly any combination possible
  • expansible (depending on your budget and required complexity)
  • flexible

 

Example of an arrangement of combination models

 

Compared to individual models is that a time- and cost-consuming planning and design phase is rendered unnecessary. Model construction and sensoric/actuator is at all time customisable.
This model range is applicable in particular for schoolings in the field of PLC-programming and presentations. Each models ist equipped with 24-V sensors/actuators so that it can be connected up to industrial control systems (PLC, field bus systems).

Following combination models are available:

Scope of delivery:

  • Model assembled and wired on a base plate (connection by 37pole SUB-D-plug), ready for programming
  • 37pole SUB-D socket for cable manufacturing
  • Optional work pieces (depending on type of model)
  • Spare parts pack
  • Data sheet of the model
  • CD-ROM with all data sheets of the sensors/actuators
  • Terminal diagram
  • Circuit diagram

The connection cables to the control system are not in scope of delivery.
Prices on request.

 

Conveyor Belt with 2 Pushers, Article No. 224002

Conveyor Belt with 2 Pushers

Article No 224002
Control requirements:
Digital in-/outputs 10/8

Dimensions (l x w x h) : 270 x 550 x 200 mm
Weight: 4,8 kg

Data sheet

 

Conveyor Belt with Machine Tool, Article No. 224004

Conveyor Belt with Machine Tool

Article No 224004
Control requirements:
Digital in-/outputs 6/8

Dimensions (l x w x h) : 270 x 550 x 350 mm
Weight: 4,8 kg

Data sheet

 

Conveyor Belt, Turntable and Roll Line, Article No. 224003

Conveyor Belt, Turntable and Roll Line

Article No 224003
Control requirements:
Digital in-/outputs 8/9

Dimensions (l x w x h) : 405 x 550 x 180 mm
Weight: 6,3 kg

Data sheet

 

Pneumatic Picking, Article No. 224005

Pneumatic Picking

Article No 224005
Control requirements:
Digital in-/outputs 11/9

Dimensions (l x w x h) : 405 x 550 x 260 mm
Weight: 6,6 kg

Data sheet

Not connectable with 224006!

Register Storage with Conveyor Belt, Article No. 224001

Register Storage with Conveyor Belt

Article No 224001
Control requirements:
Digital in-/outputs 6/3

Dimensions (l x w x h) : 300 x 550 x 270 mm
Weight: 4,5 kg

Data sheet

 

Converter with Suck Gripper, Article No. 224006

Converter with Suck Gripper

Article No 224006
Control requirements:
Digital in-/outputs 10/9
Counteraccess: 3

Dimensions (l x w x h) : 405 x 550 x 260 mm
Weight: 6,7 kg

Data sheet

Not connectable with 226005!

to top

Your Contact Person:

Ruth-Anna Soodt
Tel: +49 (0)8731 / 50 69-400