. .

Standard models

Standard models simulate basic functionality of defined plant types from industrial areas with its focus on a clear representation for specific tasks of control engineering. An important advantage of standard models over individual models is that a time- and cost-consuming planning and design phase is rendered unnecessary. Model construction and sensoric/actuator is at all time customisable. This model range is applicable in particular for schoolings in the field of PLC-programming and for presentations. Each model is equipped with 24-V sensors/actuators so that it can be connected up to industrial control systems (PLC, field bus systems).

We can offer you these standard models:

Scope of delivery:

  • Model assembled and wired on a base plate (connection by 37pole SUB-D-plug), ready for programming
  • 37pole SUB-D socket for cable manufacturing
  • Optional work pieces (depending on type of model)
  • Spare parts pack
  • Data sheet of the model
  • CD-ROM with all data sheets about sensors/actuators
  • Terminal diagram
  • Circuit diagram

The connection cables to the control system are not in scope of delivery.
Prices on request.

Three-Axis-Portal, Article No. 220010

3-Axis-Portal

Article No. 220010
Control requirements:
Digital in-/outputs: 9/7
Counteraccess: 6

Dimensions (l x w x e): 660 x 540 x 450 mm
Weight: 5,7 kg

Data sheet

Elevator, 3 floors, Article No. 220006

Elevator, 3 floors

Article No. 220006
Control requirements:
Digital in-/outputs: 26/24

Dimensions (l x w x h): 540 x 390 x 650 mm
Weight: 9,3 kg

Data sheet

Car Wash Line, Article No. 220022

Car Wash Line

Article No. 220022
Control requirements:
Digital in-/outputs: 25/20

Dimensions (l x w x h): 1100 x 750 x 600 mm
Weight: 20 kg

Data sheet

Process Cell, Article No. 220015

Process Cell

Article No. 220015
Control requirements:
Digital in-/outputs: 16/18

Dimensions (l x w x h): 600 x 550 x 330 mm
Weight: 13,4 kg

Data sheet

Process Line, Article No. 220014

Process Line

Article No. 220014
Control requirements:
Digital in-/outputs: 15/18

Dimensions (l x w x h): 600 x 550 x 270 mm
Weight: 8,4 kg

Data sheet

Eccentric Press

Article No. 220019
Control requirements:
Digital in-/outputs: 10/3

Dimensions (l x w x h): 390 x 270 x 260 mm
Weight: 2,2 kg

Data sheet

Process Unit with Shuttle, Article No. 220012

Process Unit with Shuttle

Article No. 220012
Control requirements:
Digital in-/outputs: 20/29

Dimensions (l x w x h): 600 x 550 x 500 mm
Weight: 15 kg

Data sheet

High Level Storage Warehouse, Article No. 220021

 

High Level Storage Warehouse

Article No. 220021
Control requirements:
Digital in-/outputs: 26/11

Dimensions (l x w x h): 1290 x 470 x 600 mm
Weight: 20,5 kg

Data sheet

Assembly Line, Article No: 220020

 

Assembly Line

Article No. 220020
Control requirements:
Digital in-/outputs: 8/7

Dimensions (l x w x h): 675 x 390 x 130 mm
Weight: 7 kg

Data sheet

Parcel Turnover Model, Article No.: 220001

Parcel Turnover Model

Article No. 220001
Control requirements:
Digital in-/outputs: 10/13

Dimensions (l x w x h): 400 x 400 x 250 mm
Weight: 5,3 kg

Data sheet

Lifting Table

Article No. 220002
Control requirements:
Digital in-/outputs: 4/6

Dimensions (l x w x h): 390 x 270 x 215 mm
Weight: 1,5 kg

Data sheet

Climate Room, Article No. 220013

Climate Room

Article No. 220013
Control requirements:
Digital in-/outputs: 4/4
Analog in-/outputs: 3/2

Dimensions (l x w x h): 540 x 390 x 350 mm
Weight: 8,4 kg

Data sheet

Flexible Process Line, Article No. 220007

Flexible Process Line

Article No. 220007
Control requirements:
Digital in-/outputs: 17/17

Dimensions (l x w x h): 860 x 450 x 270 mm
Weight: 12,6 kg

Data sheet

Flexible Process Line with 3-axis portal, Article No. 220008

Flexible Process Line with 3 Axis Portal

Article No. 220008
Control requirements:
Digital in-/outputs: 25/24
Counteraccess: 6

Dimensions (l x w x h): 860 x 450 x 450 mm
Weight: 16 kg

Data sheet


Gate Model, Article No. 220011

Gate Model

Article No. 220011
Control requirements:
Digital in-/outputs: 10/9

Dimensions (l x w x h): 400 x 350 x 270 mm
Weight: 4,5 kg

Data sheet


Transport and Sorting Line, Article No. 220024

Transport and Sorting Line

Article No. 220024
Control requirements:
Digital in-/outputs: 14/6

Dimensions (l x w x h): 520 x 370 x 270 mm

Data sheet


Transport and Sorting Line with 3-axis-portal, Article No. 220005

Transport and Sorting Line with 3-Axis Portal

Article No. 220005
Control requirements:
Digital in-/outputs: 25/16
Counteraccess: 6

Dimensions (l x w x h): 800 x 540 x 450 mm

Data sheet


Conveyor Belts, Article No. 220003

Conveyer Belts

Article No. 220003
Control requirements:
Digital in-/outputs: 5/3

Dimensions (l x w x h): 390 x 270 x 90 mm
Weight: 1,4 kg

Data sheet


to top

Your Contact Person:

Ruth-Anna Soodt
Tel: +49 (0)8731 / 50 69-400